Manglam Paints

Manglam Wall Putty

Product composition:-

Pure white cement based wall putty for walls & ceiling up to 3mm thickness Manglam wall putty is eco friendly, extra ne, light weight, non-water curing, high strength, water resistant, less shrinkage, mineral based, Premium quality putty made from natural raw materials to create smooth, glossy ad extreme white surface before any paint application on walls and ceiling. Manglam wall putty can also be used as a nal surface without any paint application areas suitable for interiors & exterior.

Technical advantage of Manglam Wall Putty over traditional putty or other cement-based putty

Best for internal & external areas before paint application.
Pure white colour for premium nish.
Imported German polymer for extra strength and long life.
Extra fine carbonates and additives for smooth nish and seamless application.
Very high tensile adhesion.
Easy to mix and apply. Manual or machine mix possible.
High compressive, abrasion & water resistance
High gloss once nal surface is ready for paint application.
No water curing required
High coverages and maximum spread.
Economic & best value using Zeorich Wall putty of superior class with nomatch.
Very low VOC and suitable for green buildings.
Suitable for new and old fully dry and sound surfaces
Dry walls, cement boards, gypsum boards & plasters, plaster of paris & other surfaces (fully dry surfaces only)

Product not to be used :-

On metal, wood, rubber & other non-cement based surfaces
On rising damp plaster or concrete surfaces
In exterior damp plaster or concrete surfaces
As waterproong product
More than 1.5 mm to 2mm of thickness in single coat
No to be lled over expansion and connection joints

Since 1981

Important tools for application:

Electric low speed mixing stirrer.
Vacuum cleaner / blower to remove surface dust. Skim coat applicator/ putty blade
Cleaning sponge of good quality.
Other mixing & nishing tools such as mixing trowel, bucket, brush, broom, measuring tape etc.

Surface Preparation:

Ensure that the surface is sound, clean and free from all foreign material such as oil, grease, dust etc.
In case working on external surface, avoid applying putty on hot surface. First, let cool the surface with water spray or using wet sponge. Hot surface may compromise nal performance of MANGLAM wall putty
In case of high absorbent surfaces such as gypsum plaster or AAC block, before starting the application, rst apply the MANGLAM Primer or similar to reduce the absorption of surfaces.